Looking for more oszczędniejszych, and safer and also ways of heating homes, has caused interest in boilers with closed combustion chamber, and condensation. These are specific to boilers that need air to burn derive from outside the building. Totally combustion chamber, completely isolated from the whole process of burning the building in which it is located. Therefore, the above mentioned boilers can be placed in specific locations such as the kitchen or bathroom, in complete safety for the user. These boilers up to use the energy of the combustion process, which have very low exhaust gas outlet temperature. In order to secure the condensate of the flue must be installed as well as the special contribution chimney.

Technical Overview
Contributions to the exhaust chimney of the boiler with a closed combustion chamber and condensing boilers, is distinguished from all other contributions towers that each element is mounted in the cup silicone gasket. This ensures integrity of the entire system. All pipes and fittings that come into contact directly with the exhaust gas, and thus the droplets are made from stainless steel sheet and a thickness of 0.5 mm.

Destiny
Liners with extra silicone sealing gasket, are designed to exhaust from boilers with closed combustion chamber and condensing boilers.

Installation Instructions
Installation of chimney to exhaust from boilers with closed combustion chamber, or condensation depends on how you choose to lead the chimney system. In the case of chimney shaft used to install the system, must first thoroughly clean the glass. For the central location of the chimney shaft, use bracket spacers at intervals of approximately 2m.

In the case of shortening the pipe, the pipe should be cut on the opposite side than the cup, a tool for stainless steel materials, as well as ogratować precisely so as not to damage the seals during assembly.

In accordance with applicable laws, any contribution of chimney stack and is subject to the accepted kominiarskiemu.